Bender Board | Landscape Edging Cost And Sizes

The term bender board might imply the presence of a board of some sort but you will be surprised to know that it has nothing to do with that. But then what is a bender board? It is a synthetic product which is made from recycled plastic. The product is designed to appear just like wood although the features are very different from those of wood. For instance it does not chip off or crack as in the case of wood. Over the years bender board has become very popular around the world. It is mainly used in landscaping flower beds and lawns.

The growth in popularity of bender board can be attributed to the fact it is easy to install and it is very cost effective. It is manufactured from 100% recycled plastic therefore it is environment friendly. In fact as the name implies they are easily bendable making it easy during installation for you to conform to different angles and tight curves. In addition, with a bender board you have a very strong as well as a pliable product that is able to contour properly and evenly. Moreover, it guarantees constituency and you do not require focusing so much on structural strength. They are at sometimes hard to find due to the growing demand although there is an increasing number of manufacturers producing them.

A bender board will give your compound a revitalized outlook. Not to mention if you are a lover of natural scenes and art combined with beauty, you can achieve your desired objective. Bender boards are not just for new landscaping work on your lawn but can be very helpful if you want to redo your lawn and give it a new touch. If it is replacing the worn out bender boards, be assured that the finished result will be astonishing. But what are the steps that you should take when it comes to replacing your current bender board? Before we move to the procedures, it is imperative that we list down the materials and tools that you need in order to proceed effectively.

The Tools and the Materials Required

  1. Hammer
  2. Bender boards
  3. Metal edging
  4. Stone concrete
  5. Brick or cement pavers
  6. Shovel
  7. Course woods saw
  8. Measuring tape
  9. Stone, concrete or brick borders

Steps in Re-installing

  1. Remove the existing boards – while doing this it is important that you do not leave even one bender board behind. A hammer can be effective or you can remove the bender board.
  2. Take measurements of the area you plan to put the boards. Use a measuring tape to take the measurements. Make sure that you have taken into consideration the curves. To make your work easier, you can acquire the services of someone to take the measurements for you.
  3. With the measurements in mind, now cut the boards accordingly. If you do not have the wood saw, a wood shop can do the cutting for you at a very affordable price.
  4. Install the boards; place each bender board in the right position. Take time to make sure that you have done the placing accurately.
  5. Make sure that the bender boards sit ¾ inch above the ground. You can achieve this by using a spade normally used for landscaping.
  6. Ensure that the bender boards properly in place. This will require the use of staples or stakes that accompany the boards.
  7. Finally place motor in the place where each bender board will rest.